01909 550767      24hr  07860 373425       sales@torque-solutions.co.uk



Torque Solutions Chester 7’s Rugby

At the annual Chester 7's rugby Festival in June Torque Solutions were shirt sponsors for an invitation team of rugby players from West Yorkshire. Using their tour name 'The Honey Badgers' wearing wigs for the first game however as they progressed further into the competition the wigs were removed and they reach the final of [...]

Stubborn Nuts on a Pressure Valve

We were asked to help one of our customers with removing some stubborn nuts. We promised not to damage the bolt - nut splitters are so useful and only take seconds to remove the nut, which otherwise would need burning off. Only too happy to help. Find out more information here ... Nut Splitters 2 [...]

Hillhead Show – 26-29th June 2018

Torque Solutions are pleased to announce that they will be exhibiting at the Hillhead Show on the 26-29th June. Please visit our stand PC33 We will have light refreshments available and as always great products to see! https://www.hillhead.com/exhibitors/torque-solutions-ltd?&azletter=T&searchTerm=torque&searchgroup=libraryentry-exhibitors#/

Global Offshore Wind – Manchester 19-20th June 2018

  Torque Solutions are pleased to announce that they will be exhibiting at the Global Offshore Wind event in Manchester 19-20th June. We are joining up with our Humberside Alliance and Green Port Hull for this annual event. Please visit our stand 27 https://events.renewableuk.com/gow18-exhibition/gow18-exhibitors-list#/torgue-solutions  

12 Days of Christmas – Day 12

Day 12 – Torque Multipliers Torque Multipliers are a simple way to amplify torque through a gearbox and are used in a variety of application where space is restricted. If you would like any further information please click the link ________________  

12 Days of Christmas – Day 11

Day 11 – Pneumatic Nut Runners When you are working with large bolts in areas of risk of explosion is increased pneumatic nut runners are the best way to tighten large bolts. The tools work through a gauge which controls the exact amount of airflow into the tool which controls the torque output. These tools are for [...]

12 Days of Christmas – Day 10

Day 10 – Calibration, repair and hire What do you do when things break down ? Our Service Engineers are fully training in hydraulic tool repairs and servicing.We pride ourselves on the service we can offer - no problem is too small and we will alway be able to assist you when things are not going to plan. [...]

12 Days of Christmas – Day 9

Day 9 – Hydraulic Pumps and Gauges Hydraulic pumps are available in one and four port configurations depending on the requirement on site. We carry stocks of 110v or Air pumps in sizes ,Mini, Max and Super Max available for next day delivery . We have an extensive range on our hire fleet which is [...]

12 Days of Christmas – Day 8

Day 8 – Torq Comm Do you have problems with quality and would like to monitor your hydraulic tool process. Torque Solutions are the UK Distributor for Torq Comm. This system monitors the hydraulic pump output and ensure that the operator follows a sequence of tightening instructions to complete a tightening process. Data is then put onto [...]

12 Days of Christmas – Day 7

Day 7 – Nut Splitters Nutsplitters are used to remove nuts which are difficult or impossible to remove. Traditionally these nuts were burnt off however this damages the nuts and the bolts. This can be costly as replacing both bolts and nuts can be timely as well as the purchasing new. At Torque Solutions we have a [...]

12 Days of Christmas – Day 6

Day 6– Flange Spreaders Many valves and flanges require seals to be changed, using flange spreaders this enables you to remove and replace seal with ease and in a controlled way. Torque Solutions have flange spreaders available for hire and in stock. For more information or an onsite trial - please get in touch .........

12 Days of Christmas – Day 5

Day 5 – Hand Torque Wrench Used to ensure and check that tightening torque is achieved, Hand Torque Wrenches are used in a huge variety of industries. At Torque Solutions we have a large stocking for same day or next day delivery with torque ranges from 4-1500 Nms. We can calibrate and service Hand Torque Wrenches [...]

12 Days of Christmas – Day 4

Day 4 - Low Profile Hydraulic Torque Wrench Low Profile Hydraulic tools are most commonly used on flanges and hard to reach areas requiring large torques. The titan range of Low Profile tool has a starting torque as low as 360 Nms to largest tool capacity of 58,000 Nms. Torque Solutions are able to carry out [...]

12 Days of Christmas – Day 3

Day 3 - Battery and Electric Nutrunners Battery tools have made major steps in technology in recent years. Our range of battery tools have a torque range up to 4000 Nms. 110 Volt tools have a larger maximum capacity of 12,000 Nms. If you have an application and would like an on site demonstration please [...]

12 Days of Christmas – Day 2

Day 2 - Tensioner The use of Hydraulic Tensioners to apply accurate bolt loading in a controlled and safe manner for larger bolts is common place. Whether you are looking to buy or hire for your project Torque Solutions are able to help you. Torque Solutions have a full test facility for Tensioners for annual inspection and [...]

12 Days of Christmas – Day 1

Day 1 - Titan hydraulic torque wrenches: T Series ¾” to 2 ½” Square drive Hydraulic tools for application from 267-34,000 Nms. That’s why TITAN T-Series hydraulic torque wrenches are designed to be stronger and longer-lasting than any other similar product on the market. Find out more...  

New Titan Low Profile Wrench product video

The Titan LP 4 Low Profile Torque Wrench in action   Also in the range LP2 - 19 -60 mm Hex Sizes  - 268 - 1826 ft Ibs / 363-2476 Nms LP4 - 25 -80 mm Hex Sizes - 504 - 3451 ft Ibs / 683-4680 Nms LP8 - 46-115 mm Hex Sizes - [...]

Torque Solutions visit the new Modal Training Facility

Torque Solution have recently visited the state of art facility at Modal Training. The visit which included a tour of the unit including crane and shipping simulators. The £7 million scheme for Modal Training has been funded by Grimsby Institute and Humber Local Enterprise Partnership, and is based at the former Fabricom headquarters in Immingham. Modal Training Ltd delivers [...]

Torque Solutions announces exclusive UK distributor for Torq Comm products.

Torque Solutions Ltd announces agreement with Torq Comm the Torque App and data acquisition specialist to be their Exclusive UK Distributors for the XT1000 and XT2000 systems. Torque Solutions the Hydraulic Bolt Tightening Specialist based in Sheffield, South Yorkshire continue to be at the forefront of technology and see the huge potential of the latest [...]

Torque Solutions Expand Into New, Larger Offices

South Yorkshire based bolting solutions company, Torque Solutions, are excited to announce their expansion into bigger, brighter offices in 2017. The New Year promises great things for the Worksop business, which has been operating for 14 years. Torque Solutions specialise in providing bolting solutions and support to customers in the quarrying, power generation, oil and [...]